Moxa CONVERTER, RS-232 TIL FIBER S-

TCF-90-S-ST, M. DB9F, 15KV ESD TCF-90-S-ST

Moxa TCF-90-S-ST. Mål (BxHxD): 42 x 80 x 22 mm. Strømstyrke: 12 - 48, Strømforbrug: 20 mA. Godkendelse: CE FCC
41767M

5703431417670

TCF-90-S-ST
  • 5 på lager

Mere information om produktet

Port-powered RS-232 to optical fiber media converters.
The TCF-90 is a compact media converter that transmits RS-232 signals over optical fiber. Power is derived from either the serial port or an external power source. The TCF-90 extends RS-232 transmission up to 5 km with multi-mode fiber, or up to 40 km with single-mode fiber. A pair of TCF-90 converters can be used to connect two RS-232 devices with optical fiber in full duplex mode. The optical fiber isolates the data signals from dangerous increases in ground potential, ground loops, and electrical EMI/RFI noise, and enhances data security by eliminating the harmful effects of RF radiation and susceptibility to electromagnetic radiation.

Self-powered RS-232 to Optical Fiber
Connecting RS-232 devices to the TCF-90 is easy. The ST-type optical fiber connector is designed especially for data communication applications that transmit data either between or within buildings. The TCF-90 can be used for industrial applications and for applications that require secure data transfer.
The RS-232 port on the TCF-90 uses a DB9 female socket to connect directly to the host PC, with power drawn from the TxD, RTS, and DTR lines. Although the TCF-90 can obtain enough power from the three data/handshake lines whether the signal is high or low, we strongly recommend setting either the RTS or DTR signal to ON.

Patented LED Port Power Indicator
It's easy enough to use a multimeter to test if the serial device is supplying the TCF-90 with enough power through the serial connection, but why bother when the TCF-90 can do the testing for you? Connect the TCF-90 to the device's RS-232 port and set the SW4 switch to Test mode. If the patented port power LED indicator lights up, the TCF-90 is receiving enough power. If the LED does NOT light up, you will need to attach an external power source to the TCF-90.

Optional External Power Source
In most circumstances, the TCF-90 should be able to operate without using an external power source. However, an external USB power cord or DC power supply can be used in situations where the handshake lines are not available, both the RTS/DTR signals are set to OFF, or the attached device's serial interface chip provides less power than required.

*The product data above is provided by Icecat. EET cannot be held responsible for errors in relation to this.
Tekniske detaljer
Host-interfaceRS-232
Udgående interfaceFiber (ST)
RS-232 signalerGND,Rx,Tx
Fiber optisk strømstikST
Sendeafstand (enkelt funktion)40 km
Bølgelængde1310 nm
RX sensitivitet-24 dB
TX udgående-5 dB
Baud hastighed0,05 Kbit/s
Miljømæssige betingelser
Driftstemperatur (T-T)0 - 60 °C
Lagrings-temperatur (T-T)-20 - 75 °C
Relativ luftfugtighed (H-H)5 - 95%
Vægt og størrelse
Mål (BxHxD)42 x 80 x 22 mm
Strømstyring
Strømstyrke12 - 48
Strømforbrug20 mA
Godkendelser
GodkendelseCE
FCC
Yderligere information
Garanti2 år
*The product data above is provided by Icecat. EET cannot be held responsible for errors in relation to this.

{{vmRightBottomPopup.successMsg}}

{{vmRightBottomPopup.title}}

{{vmRightBottomPopup.body}}

*
*
Tilføj til favoritter
Slet
Slet fra denne liste
Senest besøgte
Du har besøgt denne side for nyligt
Foretrukken enhed
Enheden er i din favoritliste
Overvåg
Modtag en email <br/> når dette produkt <br/> er på lager
Prisfald
Rabatten er baseret på standardpriser og er fratrukket den gældende pris